LUMii BLACK2 LED 720/960W 6 Bar Fixture
In stock, Pickup available at London Grow HQ
Usually ready in 24 hours
LUMii BLACK2 LED 720/960W 6 Bar Fixture
No Ballast
London Grow HQ
R/O 121 Theobalds Park Road
Enfield EN2 9BH
United Kingdom
Overview
The LUMii BLACK² 720/960 LED Grow Light Fixture offers exceptional performance with an impressive operating efficacy of around 2.9 µmol/J. Built with high-efficiency LED chips rated at 3.4 - 3.7 µmol/J, this versatile fixture delivers a maximum PPF output of 2596 µmol/s when powered at 960 W (via two ballasts, each drawing 480 W). In comparison, a traditional 1000W HPS lamp typically outputs 1550 µmol/s PPF, showcasing the superior efficiency of this LED fixture.
General Information
This LED is the first on the market that offers 4 different configurations to suit your needs. It comes with 2 Digital Ballasts, and 2 x 5m extension cables.
- Configuration 1: Run as a 720W LED by hooking it up to 1 ballast.
- Configuration 2: This LED can be split into two halves to operate on a single ballast, maintaining a 720W output. Cables are included.
- Configuration 3: Run as a 960W unit by running it from 2 ballasts (must not go above 400W on each ballast or the light will shut off due to a safety cutout)
- Configuration 4: This LED can be divided into two halves, with each half powered by a separate ballast, resulting in an output of 480W per half.
Benefits
- High Efficiency: Achieves up to 2.9 µmol/J operating efficacy and a maximum PPF output of 2596 µmol/s.
- Versatile Configuration: Can be used as a single interlocked 6-bar fixture or two separate 3-bar fixtures, expanding coverage area by up to 25%.
- Adjustable Power: Operates with one or two LUMii BLACK 600W Electronic Ballasts, enhancing flexibility and maximizing light output.
- Full Spectrum Light: Suitable for both growth and bloom stages, ensuring comprehensive plant development.
- Excellent Heat Management: Open construction and low heat output facilitate effective airflow and temperature control.
- Lightweight Design: Easy to install without an integral driver, further enhancing convenience.
How to Use
For best results, install in line with the manufacturers instructions. The ballasts can be fixed directly to the unit, or positioned away from the light outside of the grow space to held reduce heat output.